Gorilla Super Glue Brush & Nozzle 12g

Gorilla Super Glue Brush & Nozzle features a precision tip nozzle and fine bristle brush, perfect for controlled application on any project. Developed for repairs in an instant, Gorilla Super Glue dries in 10 – 45 seconds and is formulated for increased impact resistance. Gorilla Super Glue Brush & Nozzle is Impact–Tough, meaning it’s formulated for increased impact resistance to handle wear and tear. An anti–clog cap with a metal pin inside ensures an airtight seal for maximum reusability. It’s Gorilla tough, every time.

Features & Benefits

• Two Ways to Dispense – Fine bristle brush for controlled coverage with less mess & precision nozzle for quick, easy dispensing.
• Impact Tough – Formulated for impact resistance and strength.
• Fast Setting – Dries in just 10–45 seconds, with no gripping required.
• Bonds – Metal, wood, ceramic, paper, rubber and more!

How to Use

• PREPARE: Protect work area from spills. Clean and dry the surfaces to be bonded.
• 1. APPLY – BRUSH: Apply a small amount of Gorilla Super Glue to one surface. Only one drop per 6.5cm2 recommended. To use brush, unscrew full cap and wipe the brush on the inner rim of the bottle to remove excess glue.
• 2. APPLY – NOZZLE: Apply a small amount of Gorilla Super Glue to one surface. Only one drop per 6.5cm2 recommended. To use nozzle, unscrew upper cap and remove.
• 3. PRESS: Press the two surfaces together between 10–45 seconds. Set time can vary based on amount of glue and type of surface glued. Excess glue can cause delayed or failed bond. Wait 24 hours for full cure.
• After each use, wipe nozzle clean with a dry cloth. Squeeze all air from bottle. While still squeezing, tightly replace lid.

Specifications

• Volume: 12g
• Dries in 10 – 45 seconds
• Anti–clog cap
• 2 ways to dispense: Brush and Nozzle